These Mounting Brackets are a part of the Robits Building System and can be used to fasten motors to get your robot moving.

Motor Mount [Side 2 Hole] (am-5012):

The Side 2 Hole Motor Mount is an excellent way of mounting a NeveRest motor to your Robits tubes. The mounting gusset is 1/8" thick 6061 aluminum for strength and features an 8 hole NeveRest hole pattern to allow users to mount a motor in 45° increments. The corners are notched to allow the mount to fit nicely against other Robits tubes and the 2 #10-32 holes are aligned on the bracket to allow it to be mounted centered on a tube. Additionally, this gusset is compatible with our 3/8" hex bearing (am-4489).

Side Slotted Motor Mount (am-5033):

The Side Slotted Motor Mount is comparable to our original Motor Mount (am-5012), but with some more flexibility on placement. The mounting gusset is 1/8" thick 6061 aluminum for strength and features an 8 hole NeveRest hole pattern to allow users to mount a motor in 45° increments. The corners are notched to allow the mount to fit nicely against other Robits tubes and the 2 #10-32 holes are aligned on the bracket to allow it to be mounted centered on a tube. Additionally, this gusset is compatible with our 3/8" hex bearing (am-4489).

80T or 100T Motor Mount (am-5017):

The 80T - 100T Motor Mount is primarily designed to integrate with our 1" Robits tube. This gusset is 1/8" thick 6061 aluminum making it resilient to bending even under heavy loads. It utilizes a unique slotted feature to allow users the option of making an 80 tooth or 100 tooth gearbox.

80T Supported Gear Pairs

20T (am-3820) & 60T (am-5020_60) [3:1]
28T (am-3647 ) & 52T (am-4733 ) [1.9:1]
30T (am-5020_30) & 50T (am-5020_50) [1.7:1]
40T & 40T (am-5020_40) [1:1]

100T Supported Gear Pairs

40T (am-5020_40) & 60T (am-5020_60) [1.5:1]
50T & 50T (am-5020_50) [1:1]

80T or 100T Double Motor Mount (am-5042):

This Double Motor can integrate two motors into one system I order to take advantage of both of their Torque. It is primarily designed to integrate with our 1" Robits tube. This gusset is 1/8" thick 6061 aluminum making it resilient to bending even under heavy loads. It utilizes a unique slotted feature to allow users the option of making an 80 tooth or 100 tooth gearbox.

80T Supported Gear Pairs

20T (am-3820) & 60T (am-5020_60) [3:1]
28T (am-3647) & 52T (am-4733) [1.9:1]
30T (am-5020_30) & 50T (am-5020_50) [1.7:1]
40T & 40T (am-5020_40) [1:1]

100T Supported Gear Pairs

40T (am-5020_40) & 60T (am-5020_60) [1.5:1]
50T & 50T (am-5020_50) [1:1]

Single Motor Bearing Mount (am-5022):

This Bracket is primarily used in the Robits Solo Motor Bearing Assembly and can facilitate motor mounting or hold an 0.875 in. OD Bearing such as am-4489. It is made from polycarbonate and is shaped so that it can be braced around 1 x 1 in. Tubes.

Pass Through Plate (am-5023):

This Bracket is primarily used in the Robits Pass Through Gearbox and can facilitate motor mounting or hold an 0.875 in. OD Bearing such as am-4489. It is made from polycarbonate and is shaped so that it can be braced around 1 x 1 in. Tubes.

Sport Gearbox Mount (am-5043):

This Bracket allows a Sport Gearbox to be able to be mounted onto Robits! With a 0.5 inch hole spacing, this bracket is perfect for mounting on any Robits Tubes or Gussets. It's 1/8" thick 6061 aluminum making it quite tough.

80T Sport Gearbox Mount (am-5044):

This Sport Gearbox mount is compatible with our Robits 1x1 Tubes and features an 80 tooth gear spacing between the the Sport output and the Tube's bushing hole. It's made from 1/8" thick 6061 aluminum so it can allow users to create a rigid 80 tooth gearbox.

NEW Featured Products

Finish

Material

Price