How Can AndyMark help you with FIRST Tech Challenge?

CENTERSTAGE℠ Chassis S3 Building System NeveRest Gearmotors PicoBox Gearboxes Nubs Wheels

Dive into FIRST Tech Challenge with AndyMark!

AndyMark has been working with FIRST to manufacture the official game pieces and sets for FIRST Tech Challenge since 2013.

We've worked to create high quality products designed specifically with FIRST Tech Challenge teams in mind, including robust gearmotors, highly configurable chassis, building systems, and useful motion components.

There are millions of possibilities for making a competitive robot. This is a good starting point for exploring the possibilities that you have available here at AndyMark. We're here to make it EASY and reduce confusion.

Our goal is to deliver quality products and outstanding service. Any questions or help picking components, reach out to us at support@andymark.com or by phone at 877-868-4770.

QUICK START GUIDE

Here's a list of things you'll probably need to build a successful robot for a FIRST Tech Challenge robot.

  • FTC Chassis (aka "drive base", "drivetrain", "chassis", "drive system") - This is the base platform used for your robot design.
  • S3 Building System - Design the mechanisms you need to play the game using these components.
  • NeveRest Motors - Performance, many ratio options, and years of proven reliability to get your mechanisms moving.
  • PicoBox Gearboxes - Strength, combined power of multiple motors, and an additional ratio change to reach peak output performance.
  • Nubs - The perfect connection point for your moving pieces
  • Wheels - Many durometers, bores and styles-our wheels aren't just for driving. 
  • The FIRST Tech Challenge Perimeter Kit - Get the official perimeter used for events, and don't forget to pick up a set of soft tiles.

S3 Building System

Where do you go from your chassis? You go up! Make an intake, an arm, an elevator, and more with the S3 Building System. 

The S3 extrusion sets the tone for all other S3 related parts and products. Made from 6061-T6 Aluminum, this box tube is strong and sturdy. Clearance holes for 6-32 screws are spaced every 16mm creating a grid for interfacing with gussets, Nubs, PicoBoxes, gears, and sprockets, as well as many parts from other vendors too! 8mm holes every 32mm also provide an interface for products with an 8mm alignment boss. 16mm long slots on two faces also allow for adjustability in belt or chain driven mechanisms and enable precision alignment of your structure to get the exact fit your design requires.

S3 Explainer

Check out our S3 User Guide for more information how to take advantage of these features!

NeveRest Gearmotors

AndyMark offers the most reliable motors and gearboxes for FIRSTⓇ Tech Challenge teams. All of our NeveRest gearmotors - that's a motor with a gearbox pre-attached - are approved for use in FTC.
NeveRests come in 7 different gear ratios, ranging from 3.7:1 (for super fast, low torque applications like flywheel mechanisms) to 264:1 (for high torque, low speed use like rotary arms).

Classic vs Orbital

There are two different families of NeveRest gearmotors - Orbitals & Classics. The difference is in the internal workings of the gearbox and where the output shaft comes out. The NeveRest Orbital gets its name from its planetary gearbox, whereas the NeveRest Classic features a compact spur-based gearbox design. The shaft on a NeveRest Orbital is in the center of the motor, while on a NeveRest Classic the shaft is off to one side. Both feature 6mm D-shaped steel output shafts, making them compatible with many other products in the marketplace!

The differences in mounting geometries for our NeveRest Motors are shown here:
Classic NeveRest Mounting Classic NeveRest Mounting

And if you need more gear reduction options, keep scrolling to read about more gearboxes!

PicoBox Gearboxes 

NeveRests can face mount to a lot of places! You want to mount them somewhere else you say? You want to combine the power of two NeveRests in to one output? Have we piqued your interest?

PicoBox gearboxes come with 35, 40, and 45 Tooth gears allowing you to adjust your final output up by 1:1.28 or down by 1:0.78.

LEO, MEO, and GEO PicoBoxes will attach to your Orbital NeveRests, while Solo, Uno, and Duo PixoBoxes attach to Classic NeveRests.

All PicoBoxes feature a robust 6mm D Shaft, the same durable shaft size that is standard on our NeveRest motors.

Where Do These Get Used?

LEO and Solo PicoBoxes are used to mount single NeveRests securely to structure and support a motion item like a pulley or sprocket. These are useful for intakes and shooters. You can also use the individual plates within these products as simple mounting brackets for your NeveRest motors.

MEO and UNO PicoBoxes are used to provide additional ratio changes to a NeveRest ratio AND give more mounting options.

GEO and DUO are used to combine two separate NeveRests into one shared output. Most often used for the drivetrain.

We also carry PicoBoxes that support servo motors! Use the PicoBox Servo to mount individual servos securely to structure and support a motion item like a pulley or sprocket. The PicoBox Super Servo supports one servo and provides additional ratio changes to a servo AND gives more mounting options. Use a PicoBox Super Servo to combine two servo motors into one output shaft.