This product ships as an unassembled kit and requires drilling some holes.

You have enough to worry about when preparing for FIRST Robotics Competition events. Ensure your driver station setup is worry-free, by using this Driver Station Tray.

The driver station tray is a lightweight solution to a problem that all FIRST Robotics Competition Teams face:

Getting the drivers' controllers and hardware to the field without forgetting anything AND making sure that when a robot slams into the alliance wall, your expensive laptop and beautiful controllers are not tossed onto the ground.

Features:

Loads of hook and loop to secure controllers and laptops to the tray as well as secure the tray to the shelf.
Near maximum dimensions allowed in the rules to ensure you have all the space you need for the perfect setup.
Comes in pretty colors!
Easy to carry, and store
Lightweight yet rigid. Thank you polycarbonate sheet and peanut extrusion!

Even More Comfort:

To make for a better grip, you may 3D print a Handle Grip with the STL files below. These handles sandwich the polycarbonate handles for a smoother rounded grip and the screws to attach these are already included in your purchase.

Some Assembly Required:

Screw two handle sheets per side into the peanut.
Use the pre-drilled holes in the polycarbonate bottom as a drill guide to match drill the peanut.
Rivet the bottom on.
Drill mounting holes for the wire strap mounts in the desired locations.
Install wire strap mounts and straps.
Install hook and loop as desired to secure the laptop to the tray and the tray to the driver shelf at events.

FIRST® Robotics Competition Perimeter & Accessories

Price