E4T OEM Miniature Optical Encoder Kit
am-3132
$43.00
The E4T miniature optical encoder provides digital quadrature encoder feedback for high volume, limited space applications. The E4T is designed to be a drop in replacement for the E4P that offers h...Read More
Product Overview
Pin-Out:
- Pin 1: +5VDC
- Pin 2: A Channel
- Pin 3: Ground
- Pin 4: B Channel
- One - Spacer Tool for US Digital E4T 360-250 Encoder
- One - E4T 360-250-S-H-D-B Encoder
- One - Encoder Cable, 3' long (am-2269)
- One - Centering Tool for E4T 360-250 Encoder
- Two - Philips Head Mounting Screws
Specifications
- Input Voltage: 5VDC
- Output: 360 CPR
Documents
Returns
Returns are accepted within 30 days of purchase.
View our return policy here.
Recommendations
20 reviews
-
Mounting screws supplied are too big for the ToughBox Mini mounting holes
I haven't used the encoders yet since we just installed them. However, the installation job was made much harder trying to screw the supplied screws (machine bolts) into the Toughbox Mini mounting holes. The bolt diameter was slightly larger than the holes, so we couldn't get them started. Once we realized that the holes were not threaded, so we didn't have to worry about stripping them, we found slightly smaller bolts and were able to force them in. Small self-tapping screws (i.e., with a pointed end) would have been a much better provided screw.
-
Good but fragile
These work great on the standard kit of parts gearbox. The only problem is if the gearbox must be disassembled the encoder will be destroyed and must be replaced
-
Added to AM14U5 - BD56MB... mecanum drive
Added 2 of these to my home AM14U5 - mecanum robot. Reading wheel rotation on both wheels. Will be working on autonomous path following in the near future. Good job again Andy Mark.
-
Very useful
I'm using to be that came with Evo shifters, works great. When disassembled the transmission it moves and the signal is lower than the other mounted in the opposite side. Which is the measure between sensor and disc?
-
Review
5 Stars
-
"Review"
"5 stars"
-
Review
5 Stars
-
Review
4 Stars
-
E4T OEM Miniature Optical Encoder Kit (am-3132)
Still haven't tried out
-
Review
5 Stars
-
Works as expected.
New encoder works as expected.
-
Review
5 Stars
-
Great encoder for the Toughbox Mini
We have purchased at least 10 of these units. They mount easily. The documentation is great. A pair of newbie students can install one with minimal guidance.
-
"Review"
"4 stars"
-
All items from AndyMark
I am grateful for the service from AndyMark. On the encoders, I do think that the shipping cost is somewhat high, but I understand that AndyMark has little or no control over the expense of shipping. Thank you again Mike Johnston
-
Requires care to install
The install instructions are clear, but not foolproof. One of our students crushed the optical disc during install.
-
"US Digital has CAD files"
"We've used these for years with good success as long as we mounted them properly. US Digital has CAD files (E4T-360-250-S-D-D-1) for download. http://www.usdigital.com/products/encoders/incremental/rotary/kit/E4T"
-
Review
5 Stars
-
Review
4 Stars
-
Review
5 Stars
